In recent years, with the development of the economy, the role of port terminals as a transportation hub has become increasingly important. As a distribution center for cargo and passenger flow, the port terminal plays an important role in berthing, loading and unloading cargo and traveling to and from passengers. Therefore, it is more necessary to configure lighting fixtures with better performance in the dock project to meet the normal development of night work. With the increase of energy conservation and emission reduction in the world, the port lighting is optimized and replaced with high-efficiency and low-energy LED port terminal Flood lighting products to improve the overall capacity of port lighting and achieve energy saving and emission reduction effects.
It has a life of 50,000 hours, while traditional lighting can only work for 5,000 to 6,000 hours. This means that if you switch to our LED lights, if you need to drive for 10 hours a day, you will be able to run for more than 13 years. And our LED products offer a 5-year warranty. If you are building or renovating your port lighting, please contact us. We will provide you with free port lighting design and Dialux simulation. Design the lighting solution that best suits you. Looking forward to your message.
So what conditions do port lighting need to meet?
Lighting design requires port lighting, luminous flux is stable and stable, no fluctuations,
Stroboscopic energy is small, no stroboscopic hazard. Visual comfort, no acid, swelling,
Visual discomfort, visual fatigue. And in order to get uniform illumination, it is usually
Installed on a high pole of 25-50 meters around, and needs to reach illumination of 200 to 300 lux.
And there are the following points to note.
1. High power
Because the installation height is about 25-50 meters, it has the characteristics of large illumination range. In order to meet the illumination requirements of the port, the power of general lamps should be above 400W.
2. Long life
Due to the high installation height, it is not easy to repair after the lamp is damaged. Therefore, it is necessary to install a long-life LED lamp.
3. Safe and reliable
The variety of goods on the port terminal, the environment is complex,
It is necessary to configure safe and reliable lighting fixtures to ensure the lighting safety of the port terminal and prevent incidents caused by the quality problems of the lamps.
4. Requires protection level
The port is in a humid environment all year round, so there is a requirement for the waterproof and dustproof level of the luminaire, and it needs to pass the corrosion resistance test.
It can prevent water vapor from entering the interior of the lamp body and being affected by the humid air of the port, thus extending the service life of the lamp.
5. Good light transmission
Due to the relatively heavy fog at the port terminal, in order to meet the illumination requirements of the port terminal, it is necessary to use lighting fixtures with good light transmission.
6. Good color rendering
High color rendering is required. Due to the large amount of goods at the port terminal, it is easy to confuse the goods if the color rendering is not good enough when working at night.
7. Windproof
Due to the environmental problems of the port terminal, there are often high winds, so the product should have the ability to prevent wind.
Why choose our LED port flood Lighting fixtures?
1.Lightweight
In addition, there may be many security risks during use. After a long period of use,
The pole will gradually age. If the weight of the luminaire is too heavy, there will be a possibility of collapse. And our lightweight LED floodlight can greatly reduce the likelihood of this happening and reduce labor costs during maintenance.
2. High efficiency
High quality Lumileds 5050 chip with stable and uniform light source and efficiency up to 150LM / W. Precise control of the light source minimizes light wastage. And it is easy to replace metal halides and high pressure sodium lamps up to 1500-4000W to achieve the best lux requirements.
3. Multiple certifications
Our port lights are ETL, DLC, ENEC, TUV, CE, RoHS, SAA, CB, IECEE, Lm79, Lm80, ISTMT, IK08, salt spray test. Suitable for the global lighting market.
4. The module can be rotated
In order to improve the accuracy of the dock lighting, the design of the rotatable module allows us to adjust the lighting angle according to the site to get the best uniform illumination.
5. Anti-glare
Taking into account the effects of glare, our LED port terminal lighting fixtures can be equipped with an anti-glare cover for optimal illumination and anti-glare effects.
6. Good heat dissipation
Structure on heat dissipation, the heat dissipation area is langer, and the heat dissipation effect is better, it's with Lighter weight, which is 1/3 of weight of die-casting, proximate matter and cold forging. Have a very good cooling system using In combination, if the heat around the LED chip is too high, the brightness and life of the lamp will be reduced., and also the great importance to heat dissipation during design, which is one of The reasons for the durability of our lamps.
7. Long life
The long life of 50,000 hours is several times higher than that of metal halides and high pressure sodium lamps. The cost of long-term use of LEDs will be lower and lower.
8. Waterproof, lightning protection, hurricane
The IP66 waterproof, lightning-proof and hurricane resistant to 56m/s protect the luminaire from damage in inclement weather. The lamp housing is made of high-quality aluminum alloy die-casting, and the outer surface is treated by high-pressure electrostatic spray to improve the overall anti-corrosion level of the product. The whole lamp has an independent heat dissipation system, the drive is external, and the power supply is internally sealed with a rubber seal to provide heat dissipation and waterproofing, so that the protection level of the lamp reaches IP66 without fear of the wet environment of the port terminal.
9. Optional lighting angle
Haps you are still worried about which lighting to choose for the lighting angle, our lamp has 10, 20, 60, 90 degree, P50-P8, P50, Type IV can choose. The installation height of the luminaire is usually between 30 and 50 meters And the LED flood light will use high quality Lumiled 5050 chips and lenses to select the desired illumination angle. The direction of the Beam is concentrated to achieve precise illumination of the light and reduce light Loss.
10. Warranty
We offer up to 5 years warranty on this luminaire, and we will be at your service whenever there is a problem with the luminaire.
11. Free DIAlux Lighting simulation design
If you are still hesitating about what kind of lighting to choose for your venue, don't worry. We offer free DIAlux analog lighting design, tailored to your port terminal LED lighting solution based on your size, environment and number of poles!
In conclusion
The high power LED port terminal lighting is designed to replace 600W to 4000W metal halides and HPS flood lights. We specialize in the R&D and manufacturing of large area lighting to support the illuminating of large areas We have achieved very good results in all kinds of Products Have been sold to more than 130 countries and regions, if you need to improve your port lighting, please leave a message, we will contact you as soon as possible.
Related recommendation:
What are the factors that affect the price of LED lamps
Why can low-power LED lighting replace high-power traditional lighting?
Which LED lighting fixtures can be used in the stadium, what is the price?
Stadium lighting requirements and operating costs
How many watts of LED light can replace 1000 watt metal halide lamp?
Share the Post
E-mail: william@lampshining.com
Contact Us
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved
