Which LED Light is best for factory and workshop lighting?

With the continuous development of industrialization technology level, in the era of global intelligence, whether it is a new or transformed workshop, there is a higher demand for lighting. Originally using traditional lighting fixtures, the luminous efficacy is only 60-80LM/W. In the illumination, the basic plant workshop lighting needs are not met. In terms of energy saving, the requirements of the factory cannot be met. Therefore, more and more workshop and factory lighting have begun to use LED lighting.

Now I see a lot of factories and workshops using LED lighting, the effect is very good. But which LED lighting fixture do they use? In fact, according to the height and environment of the workshop, the new UFO LED High Bay Light is usually adopted.

The lighting of the factory must consider the power and photoelectric parameters of the luminaire, and also consider the safety of the luminaire. LED lighting has the characteristics of energy saving and environmental protection, long life and high luminous efficiency. It is widely used in industrial lighting. The factory lighting generally chooses white light above 4000K. It is more common to install in the ceiling, and the power is usually between 50-200W, it can replace 100-400W metal halide, which is the best substitute for traditional lamps, providing better lighting for the workshop to get the best production environment. Obviously, UFO LED High Bay Light has a higher initial cost than traditional lamps, but due to its high LED efficiency, long life and maintenance-free features, it can bring huge energy savings to the factory in the long run. The lighting design of the workshop must be combined with the actual use and the cost of operation, etc., not only the price and style.

The lighting of the factory must consider the power and photoelectric parameters of the luminaire, and also consider the safety of the luminaire. LED lighting has the characteristics of energy saving and environmental protection, long life and high luminous efficiency. It is widely used in industrial lighting. The factory lighting generally chooses white light above 4000K. It is more common to install in the ceiling, and the power is usually between 50-200W. It can replace 100-400W metal halide, which is the best substitute for traditional lamps, providing better lighting for the workshop to get the best production environment. Obviously, UFO LED High Bay Light has a higher initial cost than traditional lamps, but due to its high LED efficiency, long life and maintenance-free features, it can bring huge energy savings to the factory in the long run. The lighting design of the workshop must be combined with the actual use and the cost of operation, etc., not only the price and style.

When choosing LED lights, the lighting of the workshop needs to be based on the size of the plant and the heat dissipation of the plant. In the case, the illuminance required by the factory is considered. The following points need to be considered:

1. LED lamp brightness

Due to the large space of the factory building, the selected workshop lighting fixtures must meet the required average illuminance value. The choice of high-efficiency luminaires, the greater the brightness, the wider the range of illumination. However, it should be noted that the light of the luminaire is chosen to be warm white light to avoid eye damage;

2. LED light cooling

The factory is because of indoor work. Therefore, when the weather is hot, the indoor temperature is higher than the outside. When choosing an LED luminaire, consider the heat dissipation of the luminaire. The heat dissipation of the luminaire determines the service life of the LED lamp;

3. LED light waterproof performance

Some customers think that LED lights are hanging on the ceiling, so there is no need to consider the waterproofness of the lamps. In fact, this is not right. In the lighting environment where the air is relatively humid, it is better to choose LED high-alloy lamps with good outer casing sealing to prevent moisture from entering the interior of the lamp. This is also a kind of protection for the lamp. If the waterproof performance of the luminaire is not enough, it is easy to cause damage and reduce the service life of the luminaire;

4. LED lamp economy

When purchasing LED lights, it is necessary to consider the economics. It is not the higher the light efficiency or the higher the power, the more suitable the lighting is. According to the actual situation of the factory, it is correct to choose the appropriate illumination. There are also initial investment in LED lights and long-term operating costs. The selected LED high bay light must be easy to install and maintain;

5. Light characteristics of LED lights

The selected LED lamp must meet certain optical characteristics, such as light distribution, glare control, etc;

The main advantages of our graphene UFO LED High Bay Light for the plant floor:

1.High luminous efficiency

Industrial workshops with large machinery have high ceilings and large space, so the required illumination requirements are relatively high. Graphene UFO LED High Bay Light has high light efficiency, up to 160LM/W. And LED is directional lighting. Therefore, it is very suitable to consider the height of the workshop and the design illumination.

2. Energy saving

UFO LED High Bay Light consumes low power, is environmentally friendly, and is rugged while meeting warehouse illumination requirements. It plays a key role in reducing environmental pollution and saving operating costs in the plant floor. In addition, we have configured an inductive sensor that automatically switches and adjusts brightness according to the environment and employee's actions, which is very helpful in energy saving.

3. Long life

UFO LED High Bay Light has a service life of more than 50,000 hours. And the switch does not require warm-up time.

4. Light characteristics

UFO LED High Bay Light anti-glare, soft light, uniform brightness, effectively avoiding the long-term construction personnel's eye fatigue characteristics.

5. Heat dissipation

The new graphene material is light in weight, small in size and better in heat dissipation. The heat sink is made of graphene material, and graphene has excellent thermal conductivity.

6. Waterproof

The waterproof nature of the IP65 is designed to meet the waterproofing needs of the shop floor lighting.

In today's LED lighting market, many unscrupulous manufacturers sell low-cost LED lights in order to reduce costs, and manufacture LED lamps with low security and low quality. Although the initial cost is low, there are frequent problems. Therefore, it is very important to choose an LED lighting manufacturer with many years of lighting experience. Our Lampshining has been in production and development since 2010 and has many years of lighting experience in warehouse lighting. If you want to design a perfect LED lighting solution for your warehouse, please feel free to contact us.

Related recommendation:

How to reduce the operating costs of warehouse lighting？

What effect does the power supply have on the LED?

Difference between led high bay lights and ordinary high bay lights

Why LED Lighting is suitable for industrial high bay lighting

LED High Bay Lighting 400W can replace how many watts HID?